The worlds first dedicated Speed camera detector linked to the highest end DVR. Over a year in development to give you the Ultimate GPS speed camera detector system with DVR.

Features include 2.4 inch wide colour screen.Custom on screen speedometer with over speed visual / audible alerts for camera sites. Speed and Red light camera visual and voice alerts including Mobile Laser locations. Speed limits of camera/red light/mobile sites. Count down display to the camera area in Meters and Graphical bar.User adjustable warning distance range or Auto ranging depending on vehicle speed Motorway mode stops all false alerts from side roads(A first for a GPS detector).

DVR Features:

  • Highest end Sony cmos with full 1080p HD resolution ( Up to 32GB Micro SD compatible).
  • 3D Axis g-force sensor.
  • Drivesmart fully featured video playback software with map over lays and g-forces displayed.
  • Optional clip on Laser Detector (Coming soon)

Drivesmart Pro HD Update

Pro HD Viewing Software

Frequently Asked Questions


This is usually caused by having ‘Motion Detection’ mode activated. This feature needs to be set to ‘OFF’ whilst normal driving. It is used when leaving the car unattended and needs to be activated manually before you leave the car. It uses the in-built G-Sensor to monitor for vehicle movement and then starts recording for the length of time set in the ‘MOTION EVENT REC’ option.

It is possible that the incorrect database has been uploaded to your Drivesmart. If this happens, your unit will stop working. To resolve the issue, make sure you download the correct product database and run the update again.

This is generally caused by installing an incorrect update to the Alpha. Make sure you have downloaded, and installed, the correct database. It might also be a faulty power lead. If you have this issue, please give us a call on 01483 522 225.

This could be a couple of things. Firstly, scroll through the menu and make sure you have Cruise Over Speed Warning off. This is a speed you can set which, when exceeded, will trigger an alert. So if this is set to 40MPH, you will be alerted everytime you exceed this speed. If you want this setting to remain on, it is advisable that you set it to 70MPH.

The other option to check is Continue Alert For Overspeed Warning On. This will alert you to the speed limit of the road when you are approaching a speed camera. This can also be switched off, but it is advisable to keep it on.


You probably have the speed set to KPH. This can be changed in the settings.

This is not a fault but a feature of modern cars which are over calibrated so they cannot be culpable in any speeding offence and to allow for any changes in wheel or tyre sizes. There will be some lag in acceleration or braking but at a constant speed the DriveSmart will be more accurate. There is a setting in the menu to add a few MPH to the shown speed to level this up with your speedo if you want to.

You have probably updated the unit with the wrong file (Loaded the DriveSmart Pro update on the Alpha for example.) Simply re-update with the correct file and this should solve this.

You can change the clock time to adjust for GMT/BST and European time zones. Scroll through the menu and add or remove an hour or more as required.